![]() If all else fails, you may be able to find a cheap USB Zip drive on eBay. I've heard that USB to "Real IEEE1284 Parallel Port" converters do exist, based on the USS720 chip, but I've never used one and I don't know whether they would work with the Zip drive in Windows - they would be subject to the same compatibility conditions I outlined above (and probably be even more strict about how the Zip driver is written). Original Zip 100 Plus Driver CD.Valid for the SCSI and Parallel port.Iomega Tools included:- 1-Step Backup- Copy Machine- FileMatch- Tools- Guest- FindIt. It can't use ECP (Enhanced Capabilities Port) mode in my experience, it doesn't seem to like ECP/EPP combined mode either. In case the ExpressCard port allows you to configure its capabilities, the interface chip used in the Zip100 drive uses EPP (Enhanced Parallel Port) mode if possible if the port doesn't support this, it will fall back to PS/2 (bidirectional) mode then, presumably, nibble (standard/compatibility/AT) mode. I've never used a PCI parallel port (even my Socket AM3+ motherboard has a pin header on the board to allow a parallel port to be connected which is then available on the traditional address - that may change next time I upgrade, though.) but I've heard that their level of compatibility with "real" ports can vary when they're used for things other than printers (which is probably all the manufacturers test them with). The ExpressCard port will appear as a PCI parallel port rather than as a traditional ISA port on the old 0x378/0x278/0x3BC address which the drivers may be expecting if they attempt to access it directly. If the Zip drivers bypass the Windows parallel port layer and attempt to access the port directly, you're more likely to have problems. Is your parallel port enabled in the bios and set to bi-directional windows has to see a parallel port first before it can use devices attached to it. Iomega Zip driver package (IomegaWare 4.0.2) driver download. If they go through the Windows parallel port driver layer then, as long as the ExpressCard behaves exactly like a traditional parallel port at the hardware level, the drive should work. Iomega USB Zip 100 Driver Installer File Version: 8.5 File Size: 2.33M Supported OS: Windows 10, Windows 8.1, Windows 7, Windows Vista, Windows XP Download. ![]() You may also check this link regarding a similar issue to yours. This worked OK up to Windows 7 with the XP drivers (in Windows Vista/7 32-bit) or the XP 64-bit drivers (in Windows Vista/7 64-bit). ![]() You're unlikely to be able to get the drive to work with a USB to Parallel converter because they are intended for use with printers - they present the computer with a USB printer and relay the data from it to the parallel printer attached to the converter.Īn ExpressCard parallel port should work, in theory, depending on how IOmega wrote the drivers for the Zip drive. If your device does not work automatically when you plug it into your computer, you may need to get in touch with the device manufacturer or go to their website to download the necessary drivers for Windows 10. I also have a working Iomega ZIP-100 parallel drive.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |